Radio Integration – Quick Start
The instructions in this section assume that you have already connected the WAVE Gateway hardware. If you have not done...
- Home
- Radio Interoperability
Radio Interoperability
-
-
WAVE Gateway Setup
This section provides instructions for the initial setup and configuration of the WAVE Gateway hardware required to integrate supported radio... -
WAVE Gateway Specs
The following list identifies the minimum specifications for the WAVE Gateway Hardware. Standard Hardware: HP Prodesk 400 G5 Minimum Requirements:... -
Adding a Radio System
There are several steps to adding a radio system. First you will need to obtain a WAVE Gateway. You can... -
How to Add Radio Subscribers
Subscribers exist to associate a radio unit ID with a WAVE Radio System. This allows Private Calls between Broadband and... -
Connecting Capacity Plus (Single Site and Multi Site) Radio Systems
To integrate a Connect Plus Radio System with WAVE On the Customers page, click Radio System. The Radio System page... -
Connecting Capacity Max Radio Systems
Connecting Capacity Max Hardware Use an Ethernet cable to connect the WAVE Gateway to Switch Port 21. Use the Ethernet... -
Capacity Plus Radio System Parameters
The following images map the WAVE MNIS Gateway Connection Info parameter on the left with the radio system parameter on... -
Creating and Assigning Privacy Keys
Privacy keys are used with Radio Systems that support privacy key encryption. WAVE associates Privacy Keys with Talkgroups. The Privacy... -
Associating a Radio System with a Talkgroup
Talkgroups are Broadband-only by default. You can associate any current Talkgroup with any existing Radio System or you can create... -
InternalWizardText
InternalWizardText to radio wizard walk-through. This section is used internally. -
Connecting Connect Plus Radio Systems
Limitations and Requirements A maximum of 30 simultaneous calls are allowed on the XRT 9000.The XRT 9000 allows a maximum...
Language