Editing a TLK 100 Device

Once you have added a TLK 100 device to the WAVE OnCloud Portal, it automatically appears as a User in your Users menu. From the Users menu, you can edit the Talkgroups and Contacts associated with the device. From the TLK 100s menu, you can edit the properties of the TLK 100 unit.

This section describes how to edit the TLK 100 device configuration. For instructions on editing a TLK 100 User see: Editing a TLK 100 User.

To edit an individual TLK 100 device

1. Login to WAVE OnCloud with your Customer account.
2. In the left navigation frame, click the TLK 100s menu.
   The TLK 100s page opens displaying all registered TLK 100 devices.
3. Click the Name of a TLK device 100 to edit.
   The Device Information page for the selected TLK 100 opens. Click the gray heading areas to switch between Device Info and Settings.
4. Device Information options include the following:
   
   • Device Mode
     User mode is the standard device mode. If you switch Device Mode to ‘stun’ then the device will become inoperable until it is switched back to ‘user.’ Stun is typically used to deactivate a TLK 100 unit without removing its settings from WAVE OnCloud.
   • IMEI
     International Mobile Equipment Identity (IMEI) is a unique numerical identifier for every mobile device. WAVE OnCloud uses the IMEI in conjunction with the Serial Number to identify each TLK 100.
   • Serial Number
     Each serial number is unique to a TLK 100 device. WAVE OnCloud uses the Serial Number in conjunction with the IMEI to identify and register TLK 100s.
   • Apps Package Version
     Specifies the current application package version. Used by support.
   • Firmware Package Version
     Specifies the current firmware package version. Used by support.
5. Settings options include the following:
   
   • All Alert Tones
     Toggles the availability of Alert Tones on this TLK 100 device.
   • Brightness Level
     Sets the display brightness level on the TLK 100 device.
   • Voice Announcements
     Toggles the reception of Voice Announcements by the TLK 100 device.
   • Hide Location Menu
     Toggles the visibility of the Location menu on the TLK 100 device.
   • Location
     Toggles the transmission of location information for this TLK 100 device.
   • WiFi
     Toggles the WiFi modem of the TLK 100 on or off.
   • Cellular
     Toggles the cellular modem of the TLK 100 on or off.
6. Actions available on this page:
   
   • Manage WiFi Networks
     This allows you to specify the preferred WiFi network for the TLK 100 unit.
     
   • Manage Users
     Switches to the Users page to edit Talkgroups and Contacts for this TLK 100 user.
   • Replace TLK 100
     Allows you to replace the current TLK 100 unit with another TLK 100 unit while keeping all the same properties and information. You will need to specify the IMEI and Serial Number of the new TLK 100. If the new TLK 100 unit is already registered and in use, you will be notified of an error.
     
   • Restart TLK 100
     Restarts the TLK 100.
     
7. Click the SAVE button to save and enable all changes.
   Click the CANCEL button to discard all changes and return to the TLK 100s page.

To bulk-edit multiple TLK 100 Devices

1. Login to WAVE OnCloud with your Customer account.
2. In the left navigation frame, click the TLK 100s menu.
   The TLK 100s page opens displaying all registered TLK 100 devices.
3. Select all TLK 100 devices you wish to edit.
   NOTE: The top most checkbox allows you to select/deselect all TLK 100s. You can also select only one TLK 100 if you require the ability to delete or modify a single unit using the Actions menu available in the next step.
4. Open the Actions menu at the top of the page.
   Click the action you wish to perform. Bulk actions are defined below and will be performed on ALL selected devices. You will be prompted before the actions are performed.
   • Manage WiFi Networks
     This allows you to specify the preferred WiFi network for all selected TLK 100 units.
     
   • Enable WiFi
     Activates WiFi on all selected TLK 100 units.
   • Disable WiFi
     Deactivates WiFi on all selected TLK 100 units.
   • Enable GPS
     Enables GPS location updates from all selected TLK 100 units.
   • Disable GPS
     Disables GPS location updates from all selected TLK 100 units.
   • Stun
     Temporarily deactivates all selected TLK 100 units without removing them from WAVE OnCloud.
   • UnStun
     Reactivates all selected TLK 100 units. Has no affect on units that are not currently stunned.
   • Delete
     Deletes all WAVE OnCloud information for the selected TLK 100 units. The units will be deactivated until added back to WAVE OnCloud. Note that deleting the TLK 100s also removes the license from the account.